Home | Additional Information | Quick guides | Banknote counters

PRO 15

Control Panel
START – Begins counting
ADD – Accumulates all  counting sessions into one result

Error Codes
Е-0 – Batteries need to be replaced
Е-1 – Lower sensor error (sensor is dirty or out of order)
Е-2 – Upper sensor error (sensor is dirty or out of order)
Е-3 – Banknote density error

Indicators
LOW BATTERY – Batteries need to be replaced

PRO 35

Control Panel
START – Begins counting and confirms settings
ADD – Accumulates all counting sessions into one result
UV – Switches UV lamp on
MG – Switches magnetic sensor on
WM – Backlighting is switched on

Indicators
TRUE – Banknote is authentic

Error Codes
Е-1 – Lower sensor error (sensor is dirty or out of order)
Е-2 – Upper sensor error (sensor is dirty or out of order) 
Е-3 – Banknote density error

PRO 40 NEO Series

Control Panel
START – Begins counting and confirms settings
ADD – Accumulates all counting sessions into one result
UV – Switches UV lamp on
BTH – Sets batch sizes (100, 50, 25, 20, 10, 0)

Indicators
ADD – Accumulates all counting sessions into one result
UV – Switches UV-detection on

Settings
UV – Sensitivity level of UV-sensor (the level changes with pressing UV button for 4 sec):
1 – low
2 – medium
3 – high
ED – Sensitivity level of Optic sensor (the level changes with pressing ADD button for 4 sec):
1 – low
2 – medium
3 – high
+1 – Increases batch size by 1 

Error Codes
Eh – Half-size banknote is fed; left or right sensor error
Ec – Banknotes jammed in the roller
Ed – Two banknotes are fed at a time or a banknote of an other density is fed
EU – UV error – suspicious banknote

PRO 57 Series

Control Panel
START – Begins counting and confirms settings 
ADD – Accumulates all counting sessions into one result
CLR – Cancels results or exists from settings
MUL – Set manual or automatic start function
SP – Speed options
BATCH – Sets batch sizes
€$ – Set magnetic detection for euros or dollars
UV – Set UV detection

Settings
Eu – Sensitivity level of UV-sensor (the level changes with pressing UV button for 4 sec):
0…9 – from low to high
Ed – Sensitivity level of Optic sensor (the level changes with pressing MUL button for 4 sec):
+1 – Increases batch size by 1
+10 – Increases batch size by 10

Indicators
ADD – Accumulates all counting sessions into one result
UV – Switches UV-detection on
MUL – Set manual or automatic start function
€$ – Set magnetic detection for euros or dollars 

Status Codes
Е-0 – Left sensor is blocked or malfunctioning
Е-1 – Right sensor is blocked or malfunctioning
Е-2 – Tray sensors are blocked
Е-3 – Tachometer sensor is dirty or out of order
F-1 – Half-size banknote is fed; left or right sensor error
dd – Banknotes jammed in the roller
Ed – Two banknotes are fed at a time or a banknote of an other density is fed
Eu – UV error – suspicious banknote
En – Magnetic strip error – suspicious banknote

PRO 85 Series

Control Panel
START – Begins counting and confirms settings
ADD – Accumulates all counting sessions into one result
CLR – Cancels results or exists from settings
MUL – Set manual or automatic start function
CUR – choice of currency
SP – choice of speed
DD – detection by width
UV – detection in ultraviolet
MG – detection of magnetic protection
0…9 – functional buttons

Settings
Eu – sensitivity level of UV-sensor (in retention of the button UV)
0…9 – from «detection is switched off» up to a high level
Ed – sensitivity level of an optic sensor (in retention of the button ADD):
0…9 – from «detection is switched off» up to a high level
En – sensitivity level of magnetic sensor (in retention of the button MG):
0…9 – from «detection is switched off» up to a high level
DD – sensitivity level of banknote’s size sensor (in retention of the button DD):
4…9 – tolerance from 4 up to 9 mm, 0 – detection is switched off
buttons 0…9 – choice of size of packaging (batch condition)

Legend of statements
Е-01 – right sensor of counting is blocked or out of order
Е-02 – left sensor of counting is blocked or out of order
Е-05 – a stuck banknote, the sensor of start is polluted or out of order
Е-06 – the sensor of a stacker is blocked, polluted or out of order
Eh – a half of banknote is revealed or right/left sensor is out of order
dd – a suspicious banknote up to seizure of banknotes without interruption, overlapped
Ed – duplex banknote or banknote of another density
Eu – suspicious banknote by UV-protection
En – suspicious banknote by magnetic protection
st – stop of the counting, to count again

PRO 95 Series

Control panel
START/STOP – beginning of counting in hand conditions, annulations of the results of counting, confirmation of chosen settings, and cancellation of setting on the display
ADD – calculation with accumulation of the results
CLR – cancellation of statements of the display, exit from a batch mode (counting with packaging)
MUL – Set manual or automatic start function
SET – review and changing of settings
SP – choice of speed
UV – detection in ultraviolet
MG – detection of magnetic protection
0…9 – functional buttons

Settings
CF1 – sensitivity level of UV-sensor:
0 – checking is switched off
1 – low
2 – medium
3 — high
CF2 – sensitivity level of magnetic detection
0 – checking is switched off
1 – low
2 – medium
3 — high
CF3 – sensitivity level of an optic sensor:
0…8 – from «detection is switched off» up to a high level
dd – sensitivity level of banknote’s size sensor:
3…7 – access from 3 up to 7 mm, 0 – detection is switched off
dBL – level of optic width according to a banknote’s condition:
0…7 – access from «detection is switched off» and dilapidated banknotes up to new, dense ones
buttons 0…9 – choice of size of packaging (batch condition)

Legend of statements
Е01, Е03 – left sensor of counting is blocked or out of order
Е02, Е04 – right sensor of counting is blocked or out of order
Е05 – the sensor of a receiving bunker is blocked, polluted or out of order
Е06 – a stuck banknote, the sensor of start is polluted or out of order
Е07 – sensor of speed is polluted or out of order
HAF – a half of banknote is revealed or right/left sensor is out of order
CHn – a suspicious banknote up to seizure of banknotes without interruption, overlapped
DbL – duplex banknote or banknote of another density
dd – suspicious banknote in size; incorrect position of banknotes in a bunker
CF1 – suspicious banknote by UV-protection
CF2 – suspicious banknote by magnetic protection
CF3 – suspicious banknote by density

PRO 100 series

Control panel
START/STOP – beginning of counting in hand conditions, forced stop of counting, cancellation of the results of counting
ADD – calculation with accumulation of the results
MUL – Set manual or automatic start function
CUR – choice of currency
CF – choice of detection
SET – review and change of settings
SP – choice of speed
C – cancellation of packaging statements, exit from a batch mode
0…9 – functional buttons

Settings
Factory setting loaded – middle significations of the sensors (in retention of the button SET)
UV – sensitivity level of UV-sensor: (in retention of the button 3 in condition SET):
0…8 – от from «detection is switched off» up to a high level
MG – sensitivity level of magnetic detection
(in retention of the button 4 in condition SET):
0…8 – from «detection is switched off» up to a high level
ED – sensitivity level of an optic sensor
(in retention of the button 1 in condition SET):
0…8 – from «detection is switched off» up to a high level
DD – sensitivity level of banknote’s size sensor
(in retention of the button 2 in condition SET):
3…8 – access from 4 up to 10 mm, 0 – detection is switched off
dBL – level of optic density according to a banknote’s condition:
0…7 – from «detection is switched off» and dilapidated banknotes up to new, dense ones
buttons 0…9 – choice of size of packaging (batch condition)

Legend of statements
Half note detected – a half of note is revealed or right/left sensor is out of order
Chained notes detected – a suspicious note up to seizure of banknotes without interval, overlapped
Double notes detected – duplex note or banknote of another density
Undersized note detected – suspicious note in size; incorrect position of notes in a bunker
Suspected note detected by UV – suspicious note by UV-protection
Suspected note detected by MG – suspicious note by magnetic protection
Suspected note detected by IR – suspicious note by IR-protection
Please wait – analyze of information

System errors
Please check left count sensor – left sensor of counting is blocked or out of order
Please check right count sensor –right sensor of counting is blocked or out of order
Please check stacker sensor – the sensor of a stacker is blocked, polluted or out of order
Please check feed sensor – a stuck banknote, the sensor of start is polluted or out of order
Please check speed sensor – the sensor of speed is polluted or out of order